{"title":"80mm ID Excavator Bushings","description":null,"products":[{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-80mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 80mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 80mm\u003c\/h2\u003e\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper or measuring tape on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776434413701,"sku":"rob26723003","price":78.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-65mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 65mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 65mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 65mm \/ 2.56\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776454828165,"sku":"rob26723004","price":78.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-70mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 70mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 70mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 70mm \/ 2.76\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776473342085,"sku":"rob26723005","price":78.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-90mm-height-95mm","title":"New Excavator Bucket Bushing ID 80mm OD 90mm Height 95mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 90mm \/ Height 95mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 90mm \/ 3.54\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776476487813,"sku":"rob26723006","price":80.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-100mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 100mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 100mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 100mm \/ 3.94\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776482844805,"sku":"rob26723007","price":81.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-120mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 120mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 120mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 120mm \/ 4.72\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776483467397,"sku":"rob26723008","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-90mm-od-110mm-height-120mmfab-heavy-parts-8942369.jpg?v=1784823008"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-90mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 90mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 90mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 90mm \/ 3.54\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776483500165,"sku":"rob26723009","price":81.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-130mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 130mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 130mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 130mm \/ 5.12\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776483631237,"sku":"rob26723012","price":95.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-80mm-od-95mm-height-130mmfab-heavy-parts-2202530.jpg?v=1784823008"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-45mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 45mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 45mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 45mm \/ 1.77\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776486908037,"sku":"rob26723013","price":75.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-40mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 40mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 40mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 40mm \/ 1.57\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776487366789,"sku":"rob26723014","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-85mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 85mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 85mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 85mm \/ 3.35\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776488480901,"sku":"rob26723015","price":81.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-3268655.webp?v=1784814068"},{"product_id":"new-excavator-bucket-bushing-id-80mm-od-95mm-height-110mm","title":"New Excavator Bucket Bushing ID 80mm OD 95mm Height 110mm","description":"\u003ch2\u003eExcavator Bucket Bushing — ID 80mm \/ OD 95mm \/ Height 110mm\u003c\/h2\u003e\n\n\u003cp\u003eRestore precise pin-to-bushing fit and reduce bucket wear with this new aftermarket excavator bucket bushing. Machined to tight tolerances for reliable performance in demanding excavation applications.\u003c\/p\u003e\n\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e 80mm \/ 3.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e 95mm \/ 3.74\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 110mm \/ 4.33\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Measure the Correct Bushing Size\u003c\/h3\u003e\n\u003cp\u003eSelecting the right bushing requires three measurements. Use a caliper on your existing worn bushing or the bucket\/arm bore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter (ID):\u003c\/strong\u003e Measure the diameter of the hole through the center of the bushing — this must match your pin diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (OD):\u003c\/strong\u003e Measure the outside diameter of the bushing — this must match the bore in your bucket or arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Measure the length of the bushing from end to end — this must match the width of your bucket boss or arm ear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways measure the worn bushing or the bore directly — do not rely solely on machine model numbers, as bucket attachments vary.\u003c\/li\u003e\n\u003cli\u003eIf the bore is worn oversize, measure the bore itself (OD reference) and the pin (ID reference) to find the correct replacement.\u003c\/li\u003e\n\u003cli\u003eWhen in doubt, contact us with your machine make, model, and attachment type and we’ll help confirm the correct size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41776491266181,"sku":"rob26723016","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-90mm-od-110mm-height-120mmfab-heavy-parts-8942369.jpg?v=1784823008"},{"product_id":"ge80sx-spherical-plain-bushing-bearing-80x125x29mm","title":"GE80SX Spherical Plain Bushing Bearing 80X125X29mm","description":"\u003ch2\u003eGE80SX Spherical Plain Bushing Bearing 80X125X29mm\u003c\/h2\u003e\n\u003cp\u003eThis GE80SX spherical plain bushing bearing is designed for heavy-duty applications requiring reliable rotation support. Sold as a single unit, it fits components needing an 80x125x29mm bearing.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e GE80SX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Spherical Plain Bushing Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eID:\u003c\/strong\u003e 80 mm (3.15\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOD:\u003c\/strong\u003e 125 mm (4.92\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 29 mm (1.14\")\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41803473191045,"sku":"FN26080733","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/ge80sx-spherical-plain-bushing-bearing-80x125x29mmfab-heavy-parts-9773706.png?v=1787268130"},{"product_id":"80mm-bushing-80x100x90mm-fits-excavator-bucket-bush-id-x-od-x-l-mm","title":"80MM Bushing 80X100X90MM Fits Excavator Bucket Bush ID X OD X L MM","description":"\u003ch2\u003eBushing Sleeve 80 × 100 × 90mm — Bucket Assembly — Fits Multiple Excavator Brands and Models\u003c\/h2\u003e\n\u003cp\u003eThis 80mm bushing sleeve is designed for use in excavator bucket assemblies. Sold as a single unit, it provides a precise fit with dimensions of 80 × 100 × 90mm (ID × OD × Length), ensuring reliable performance in heavy equipment applications.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 Unit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 80 × 100 × 90mm (ID × OD × Length)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Bucket Assembly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41819796734085,"sku":"FN260819142","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/80mm-bushing-80x100x90mm-fits-excavator-bucket-bush-id-x-od-x-l-mmfab-heavy-parts-2968570.jpg?v=1787391433"},{"product_id":"80mm-bushing-80x100x70mm-fits-for-excavator-bucket-bush-id-x-od-x-l-mm","title":"80MM Bushing 80X100X70MM Fits for Excavator Bucket Bush ID X OD X L MM","description":"\u003ch2\u003eBushing Sleeve 80 × 100 × 70mm — Bucket Assembly — Fits Multiple Excavator Brands and Models\u003c\/h2\u003e\n\u003cp\u003eThis 80MM bushing sleeve is designed for use in excavator bucket assemblies, providing durable and reliable performance. Sold as a single unit, it features precise dimensions to ensure proper fit and function in various heavy equipment applications.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New, Aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 80 × 100 × 70mm (ID × OD × Length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Bucket Assembly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41819802566789,"sku":"FN260819141","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/80mm-bushing-80x100x70mm-fits-for-excavator-bucket-bush-id-x-od-x-l-mmfab-heavy-parts-5301945.jpg?v=1787391432"},{"product_id":"80mm-bushing-80x90x110mm-fits-excavator-bucket-bush-id-x-od-x-l-mm","title":"80MM Bushing 80X90X110MM Fits Excavator Bucket Bush ID X OD X L MM","description":"\u003ch2\u003eExcavator \u0026amp; Skid Steer Bucket Bushing 80x90x110 mm — Universal Replacement\u003c\/h2\u003e\n\u003cp\u003eHeavy-duty sleeve bushing for excavator and skid steer bucket linkage and pin joints. Manufactured to precise dimensional tolerances to restore proper pin-to-bore clearance, reduce play, and extend the service life of bucket, arm, and boom attachment points.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInner Diameter (ID): 80 mm\u003c\/li\u003e\n\u003cli\u003eOuter Diameter (OD): 90 mm\u003c\/li\u003e\n\u003cli\u003eLength (L): 110 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcavator and skid steer bucket bush and sleeve replacement\u003c\/li\u003e\n\u003cli\u003eSuitable for bucket, arm, and boom pin joint positions\u003c\/li\u003e\n\u003cli\u003eUniversal fit — compatible with any machine using 80x90x110 mm bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose Fab Heavy Parts?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined to tight dimensional tolerances for precise pin fit\u003c\/li\u003e\n\u003cli\u003eHigh-strength material for resistance to wear and impact loads\u003c\/li\u003e\n\u003cli\u003eDirect replacement — no machining required\u003c\/li\u003e\n\u003cli\u003eFast worldwide shipping from dedicated heavy parts inventory\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":41825342292101,"sku":"FN260821107","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/new-excavator-bucket-bushing-id-65mm-od-80mm-height-70mmfab-heavy-parts-7416636_e90018eb-d52b-4aaa-9b09-fe1a0c15a628.jpg?v=1787559777"},{"product_id":"80mm-80x85x90mm-idxodxl-bushing-bush-steel-bearing-for-excavator-bucket","title":"Excavator Bucket Steel Bushing 80x85x90mm","description":"\u003ch2\u003eExcavator Bucket Steel Bushing 80 × 85 × 90 mm\u003c\/h2\u003e\n\u003cp\u003eThis new aftermarket steel bushing is for excavator bucket joints requiring an 80 mm inner diameter, 85 mm outer diameter, and 90 mm length. Includes 1 piece.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInner diameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 85 mm\u003c\/li\u003e\n\u003cli\u003eLength: 90 mm\u003c\/li\u003e\n\u003cli\u003eDimension order: ID × OD × Length\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42381691584645,"sku":"FN26110278","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/excavator-bucket-steel-bushing-140x160x140mmfab-heavy-parts-5977429.jpg?v=1793929091"},{"product_id":"80mm-80x95x125mm-bushing-bush-steel-bearing-for-excavator-bucket","title":"Steel Bucket Bushing 80x95x125mm For Excavators","description":"\u003ch2\u003eSteel Bucket Bushing 80 × 95 × 125 mm For Excavator Buckets\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket steel bucket bushing for supporting the bucket pivot pin and reducing wear at the pivot joint. Includes 1 piece.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInside Diameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 95 mm\u003c\/li\u003e\n\u003cli\u003eLength: 125 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eCompatible Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBobcat: 325, 328, 331, 425, E15, E17, E16, E10, E08, E25, E26, E32, E45, E40, E35, E55, E60, E74, E80, E85, X325, X328, X331, 321, 323, 324, 335\u003c\/li\u003e\n\u003cli\u003eCase: CX23, CX25, CX26B ZTS, CX28, CX30, CX30B, CX31, CX17, CX15, CX12, CX70, CX80, CX75, CX130, CX150, CX160, CX210, CX220, CX235, CX240, CX290, CX300, CX330, CX450, CX360\u003c\/li\u003e\n\u003cli\u003eCaterpillar: 302, 302.4, 302.5, 302.7, 301.4, 301.5, 301.6, 301.7, 301.8, 303, 305.5, 304, 304.5, 305, 303.5, 306, 307, 308, 311, 312, 313, 314, 315, 318, 319, 320, 321, 322, 323, 324, 325, 328, 329, 330, 336, 340, 345, 350, 352, E70B, E110B, E120B, E200B, E240B, E300B\u003c\/li\u003e\n\u003cli\u003eDaewoo: Solar 027, Solar 030, DH45, DH55, DH50, DH15, DH17, DX80, DX130, DX140, DX150, DX220, DX225, DX230, DX235, DH280, DH290, DH320, DX300, DX330, DH400, DH450\u003c\/li\u003e\n\u003cli\u003eJohn Deere: 26G, 27D, 30G, 35G, 35D, 15, 17, 20, 55, 52, 48, 60, 70, 75, 80, 120, 130, 110, 115, 150, 160, 200, 210, 225, 230, 240, 250, 270, 290, 330, 350, 450, 480, 490D, 490E, 690D, 690E, 790E, 792D, 892D, 892E, 992D, 992E, 290D, 290E, 190D, 190E\u003c\/li\u003e\n\u003cli\u003eHitachi: EX22, EX25, ZX27, UE30, EX35, EX40, EX50, EX55, ZX15, ZX17, ZX20, ZX25, ZX30, ZX35, ZX36, ZX40, ZX45, ZX48, ZX50, ZX52, ZX55, ZX60, ZX70, ZX75, ZX80, ZX85, ZX110, ZX120, ZX130, ZX150, ZX160, ZX180, ZX200, ZX210, ZX230, ZX240, ZX250, ZX27-0, ZX330, ZX350, ZX360, ZX470, ZX480, ZX500, ZX520\u003c\/li\u003e\n\u003cli\u003eJCB: 802, 803, 804, 8025, 8027, 8030, 1CX, 2CX, JS50, JS70, JS130, JS200, JS210, JS220, JS330, JS350, JS450\u003c\/li\u003e\n\u003cli\u003eKobelco: SK20, SK24, SK25, SK27, SK30, SK35, SK40, SK45, SK48, SK50, SK55, SK60, SK70, SK80, SK100, SK120, SK115, SK130, SK135, SK140, SK150, SK160, SK200, SK210, SK220, SK230, SK250, SK260, SK300, SK330, SK350, SK360, SK400, SK450, SK480\u003c\/li\u003e\n\u003cli\u003eKomatsu: PC20, PC25, PC27, PC28, PC30, PW30, PC35, PC38, PC10, PC15, PC18, PC40, PC45, PC55, PC56, PC60, PC70, PC75, PC78, PC90, PC100, P120, PC128, PC130, PC138, PC150, PC160, PC200, PC210, PC220, PC228, PC250, PC300, PC320, PC350, PC360, PC400, PC450, PC460\u003c\/li\u003e\n\u003cli\u003eKubota: KH60, KH61, KH66, KH71, KX71, KX91, KX121, KX151, KX161, U10, U15, U17, U20, U25, U30, U35, U40, U45, U50, U55, KX080-3, KX080-4\u003c\/li\u003e\n\u003cli\u003eNew Holland: EC25, EH27, EH17, EH15, EH35, EH45, EH55\u003c\/li\u003e\n\u003cli\u003eTakeuchi: TB25, TB26, TB28, TB125, TB23R, TB225, TB015, TB245, TB260, TB275\u003c\/li\u003e\n\u003cli\u003eVolvo: EC20, EC30, EC48, EC58, EC55, ECR58, EC70, EC80, EC130, EC140, EC210, EC220, EC240, EC290, EC300, EC360, EC450, EC480\u003c\/li\u003e\n\u003cli\u003eWacker Neuson: 1403, 1404, 1503, 1903, 2203, 2503\u003c\/li\u003e\n\u003cli\u003eYanmar: B19, B22, B201, VIO20, VIO15, VIO17, VIO25, VIO30, VIO35, VIO40, VIO45, VIO50, VIO70\u003c\/li\u003e\n\u003cli\u003eSamsung: SE130, SE210, SE240, SE290, SE350, SE450, MX80\u003c\/li\u003e\n\u003cli\u003eHyundai: R55, R40, R35, R15, R20, R60, R80, R110, R120, R130, R140, R150, R200, R210, R215, R220, R225, R230, R235, R280, R290, R320, R305, R350, R360, R400, R450, R480\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42491369685125,"sku":"FN26110231","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/steel-bucket-bushing-75x90x75mm-for-excavatorsfab-heavy-parts-2162450.jpg?v=1794379147"},{"product_id":"80mm-80x100x110mm-bushing-bush-steel-bearing-for-excavator-bucket","title":"Steel Bucket Bushing 80x100x110mm For Excavators","description":"\u003ch2\u003eSteel Bucket Bushing 80 × 100 × 110 mm For Excavator Buckets\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket steel bucket bushing for supporting the bucket pivot pin and reducing wear at the pivot joint. Includes 1 piece.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInside Diameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 100 mm\u003c\/li\u003e\n\u003cli\u003eLength: 110 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eCompatible Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBobcat: 325, 328, 331, 425, E15, E17, E16, E10, E08, E25, E26, E32, E45, E40, E35, E55, E60, E74, E80, E85, X325, X328, X331, 321, 323, 324, 335\u003c\/li\u003e\n\u003cli\u003eCase: CX23, CX25, CX26B ZTS, CX28, CX30, CX30B, CX31, CX17, CX15, CX12, CX70, CX80, CX75, CX130, CX150, CX160, CX210, CX220, CX235, CX240, CX290, CX300, CX330, CX450, CX360\u003c\/li\u003e\n\u003cli\u003eCaterpillar: 302, 302.4, 302.5, 302.7, 301.4, 301.5, 301.6, 301.7, 301.8, 303, 305.5, 304, 304.5, 305, 303.5, 306, 307, 308, 311, 312, 313, 314, 315, 318, 319, 320, 321, 322, 323, 324, 325, 328, 329, 330, 336, 340, 345, 350, 352, E70B, E110B, E120B, E200B, E240B, E300B\u003c\/li\u003e\n\u003cli\u003eDaewoo: Solar 027, Solar 030, DH45, DH55, DH50, DH15, DH17, DX80, DX130, DX140, DX150, DX220, DX225, DX230, DX235, DH280, DH290, DH320, DX300, DX330, DH400, DH450\u003c\/li\u003e\n\u003cli\u003eJohn Deere: 26G, 27D, 30G, 35G, 35D, 15, 17, 20, 55, 52, 48, 60, 70, 75, 80, 120, 130, 110, 115, 150, 160, 200, 210, 225, 230, 240, 250, 270, 290, 330, 350, 450, 480, 490D, 490E, 690D, 690E, 790E, 792D, 892D, 892E, 992D, 992E, 290D, 290E, 190D, 190E\u003c\/li\u003e\n\u003cli\u003eHitachi: EX22, EX25, ZX27, UE30, EX35, EX40, EX50, EX55, ZX15, ZX17, ZX20, ZX25, ZX30, ZX35, ZX36, ZX40, ZX45, ZX48, ZX50, ZX52, ZX55, ZX60, ZX70, ZX75, ZX80, ZX85, ZX110, ZX120, ZX130, ZX150, ZX160, ZX180, ZX200, ZX210, ZX230, ZX240, ZX250, ZX27-0, ZX330, ZX350, ZX360, ZX470, ZX480, ZX500, ZX520\u003c\/li\u003e\n\u003cli\u003eJCB: 802, 803, 804, 8025, 8027, 8030, 1CX, 2CX, JS50, JS70, JS130, JS200, JS210, JS220, JS330, JS350, JS450\u003c\/li\u003e\n\u003cli\u003eKobelco: SK20, SK24, SK25, SK27, SK30, SK35, SK40, SK45, SK48, SK50, SK55, SK60, SK70, SK80, SK100, SK120, SK115, SK130, SK135, SK140, SK140, SK150, SK160, SK200, SK210, SK220, SK230, SK250, SK260, SK300, SK330, SK350, SK360, SK400, SK450, SK480\u003c\/li\u003e\n\u003cli\u003eKomatsu: PC20, PC25, PC27, PC28, PC30, PW30, PC35, PC38, PC10, PC15, PC18, PC40, PC45, PC55, PC56, PC60, PC70, PC75, PC78, PC90, PC100, P120, PC128, PC130, PC138, PC150, PC160, PC200, PC210, PC220, PC228, PC250, PC300, PC320, PC350, PC360, PC400, PC450, PC460\u003c\/li\u003e\n\u003cli\u003eKubota: KH60, KH61, KH66, KH71, KX71, KX91, KX121, KX151, KX161, U10, U15, U17, U20, U25, U30, U35, U40, U45, U50, U55, KX080-3, KX080-4\u003c\/li\u003e\n\u003cli\u003eNew Holland: EC25, EH27, EH17, EH15, EH35, EH45, EH55\u003c\/li\u003e\n\u003cli\u003eTakeuchi: TB25, TB26, TB28, TB125, TB23R, TB225, TB015, TB245, TB260, TB275\u003c\/li\u003e\n\u003cli\u003eVolvo: EC20, EC30, EC48, EC58, EC55, ECR58, EC70, EC80, EC130, EC140, EC210, EC220, EC240, EC290, EC300, EC360, EC450, EC480\u003c\/li\u003e\n\u003cli\u003eWacker Neuson: 1403, 1404, 1503, 1903, 2203, 2503\u003c\/li\u003e\n\u003cli\u003eYanmar: B19, B22, B201, VIO20, VIO15, VIO17, VIO25, VIO30, VIO35, VIO40, VIO45, VIO50, VIO70\u003c\/li\u003e\n\u003cli\u003eSamsung: SE130, SE210, SE240, SE290, SE350, SE450, MX80\u003c\/li\u003e\n\u003cli\u003eHyundai: R55, R40, R35, R15, R20, R60, R80, R110, R120, R130, R140, R150, R200, R210, R215, R220, R225, R230, R235, R280, R290, R320, R305, R350, R360, R400, R450, R480\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42491369717893,"sku":"FN26110233","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/steel-bucket-bushing-75x90x75mm-for-excavatorsfab-heavy-parts-2162450.jpg?v=1794379147"},{"product_id":"80mm-80x90x140mm-bushing-bush-steel-bearing-for-excavator-bucket","title":"Steel Bucket Bushing 80x90x140mm For Excavators","description":"\u003ch2\u003eSteel Bucket Bushing 80 × 90 × 140 mm For Excavator Buckets\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket steel bucket bushing for supporting the bucket pivot pin and reducing wear at the pivot joint. Includes 1 piece.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInside Diameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 90 mm\u003c\/li\u003e\n\u003cli\u003eLength: 140 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eCompatible Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBobcat: 325, 328, 331, 425, E15, E17, E16, E10, E08, E25, E26, E32, E45, E40, E35, E55, E60, E74, E80, E85, X325, X328, X331, 321, 323, 324, 335\u003c\/li\u003e\n\u003cli\u003eCase: CX23, CX25, CX26B ZTS, CX28, CX30, CX30B, CX31, CX17, CX15, CX12, CX70, CX80, CX75, CX130, CX150, CX160, CX210, CX220, CX235, CX240, CX290, CX300, CX330, CX450, CX360\u003c\/li\u003e\n\u003cli\u003eCaterpillar: 302, 302.4, 302.5, 302.7, 301.4, 301.5, 301.6, 301.7, 301.8, 303, 305.5, 304, 304.5, 305, 303.5, 306, 307, 308, 311, 312, 313, 314, 315, 318, 319, 320, 321, 322, 323, 324, 325, 328, 329, 330, 336, 340, 345, 350, 352, E70B, E110B, E120B, E200B, E240B, E300B\u003c\/li\u003e\n\u003cli\u003eDaewoo: Solar 027, Solar 030, DH45, DH55, DH50, DH15, DH17, DX80, DX130, DX140, DX150, DX220, DX225, DX230, DX235, DH280, DH290, DH320, DX300, DX330, DH400, DH450\u003c\/li\u003e\n\u003cli\u003eJohn Deere: 26G, 27D, 30G, 35G, 35D, 15, 17, 20, 55, 52, 48, 60, 70, 75, 80, 120, 130, 110, 115, 150, 160, 200, 210, 225, 230, 240, 250, 270, 290, 330, 350, 450, 480, 490D, 490E, 690D, 690E, 790E, 792D, 892D, 892E, 992D, 992E, 290D, 290E, 190D, 190E\u003c\/li\u003e\n\u003cli\u003eHitachi: EX22, EX25, ZX27, UE30, EX35, EX40, EX50, EX55, ZX15, ZX17, ZX20, ZX25, ZX30, ZX35, ZX36, ZX40, ZX45, ZX48, ZX50, ZX52, ZX55, ZX60, ZX70, ZX75, ZX80, ZX85, ZX110, ZX120, ZX130, ZX150, ZX160, ZX180, ZX200, ZX210, ZX230, ZX240, ZX250, ZX27-0, ZX330, ZX350, ZX360, ZX470, ZX480, ZX500, ZX520\u003c\/li\u003e\n\u003cli\u003eJCB: 802, 803, 804, 8025, 8027, 8030, 1CX, 2CX, JS50, JS70, JS130, JS200, JS210, JS220, JS330, JS350, JS450\u003c\/li\u003e\n\u003cli\u003eKobelco: SK20, SK24, SK25, SK27, SK30, SK35, SK40, SK45, SK48, SK50, SK55, SK60, SK70, SK80, SK100, SK120, SK115, SK130, SK135, SK140, SK150, SK160, SK200, SK210, SK220, SK230, SK250, SK260, SK300, SK330, SK350, SK360, SK400, SK450, SK480\u003c\/li\u003e\n\u003cli\u003eKomatsu: PC20, PC25, PC27, PC28, PC30, PW30, PC35, PC38, PC10, PC15, PC18, PC40, PC45, PC55, PC56, PC60, PC70, PC75, PC78, PC90, PC100, P120, PC128, PC130, PC138, PC150, PC160, PC200, PC210, PC220, PC228, PC250, PC300, PC320, PC350, PC360, PC400, PC450, PC460\u003c\/li\u003e\n\u003cli\u003eKubota: KH60, KH61, KH66, KH71, KX71, KX91, KX121, KX151, KX161, U10, U15, U17, U20, U25, U30, U35, U40, U45, U50, U55, KX080-3, KX080-4\u003c\/li\u003e\n\u003cli\u003eNew Holland: EC25, EH27, EH17, EH15, EH35, EH45, EH55\u003c\/li\u003e\n\u003cli\u003eTakeuchi: TB25, TB26, TB28, TB125, TB23R, TB225, TB015, TB245, TB260, TB275\u003c\/li\u003e\n\u003cli\u003eVolvo: EC20, EC30, EC48, EC58, EC55, ECR58, EC70, EC80, EC130, EC140, EC210, EC220, EC240, EC290, EC300, EC360, EC450, EC480\u003c\/li\u003e\n\u003cli\u003eWacker Neuson: 1403, 1404, 1503, 1903, 2203, 2503\u003c\/li\u003e\n\u003cli\u003eYanmar: B19, B22, B201, VIO20, VIO15, VIO17, VIO25, VIO30, VIO35, VIO40, VIO45, VIO50, VIO70\u003c\/li\u003e\n\u003cli\u003eSamsung: SE130, SE210, SE240, SE290, SE350, SE450, MX80\u003c\/li\u003e\n\u003cli\u003eHyundai: R55, R40, R35, R15, R20, R60, R80, R110, R120, R130, R140, R150, R200, R210, R215, R220, R225, R230, R235, R280, R290, R320, R305, R350, R360, R400, R450, R480\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42491771551877,"sku":"FN26110232","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/steel-bucket-bushing-75x90x75mm-for-excavatorsfab-heavy-parts-2162450.jpg?v=1794379147"},{"product_id":"80mm-80x100x95mm-bushing-bush-steel-bearing-for-excavator-bucket","title":"Steel Bucket Bushing 80x100x95mm For Excavators","description":"\u003ch2\u003eSteel Bucket Bushing 80 × 100 × 95 mm For Excavator Buckets\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket steel bucket bushing for supporting the bucket pivot pin and reducing wear at the pivot joint. Includes 1 piece.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInside Diameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 100 mm\u003c\/li\u003e\n\u003cli\u003eLength: 95 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.63 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eCompatible Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBobcat: 325, 328, 331, 425, E15, E17, E16, E10, E08, E25, E26, E32, E45, E40, E35, E55, E60, E74, E80, E85, X325, X328, X331, 321, 323, 324, 335\u003c\/li\u003e\n\u003cli\u003eCase: CX23, CX25, CX26B ZTS, CX28, CX30, CX30B, CX31, CX17, CX15, CX12, CX70, CX80, CX75, CX130, CX150, CX160, CX210, CX220, CX235, CX240, CX290, CX300, CX330, CX450, CX360\u003c\/li\u003e\n\u003cli\u003eCaterpillar: 302, 302.4, 302.5, 302.7, 301.4, 301.5, 301.6, 301.7, 301.8, 303, 305.5, 304, 304.5, 305, 303.5, 306, 307, 308, 311, 312, 313, 314, 315, 318, 319, 320, 321, 322, 323, 324, 325, 328, 329, 330, 336, 340, 345, 350, 352, E70B, E110B, E120B, E200B, E240B, E300B\u003c\/li\u003e\n\u003cli\u003eDaewoo: Solar 027, Solar 030, DH45, DH55, DH50, DH15, DH17, DX80, DX130, DX140, DX150, DX220, DX225, DX230, DX235, DH280, DH290, DH320, DX300, DX330, DH400, DH450\u003c\/li\u003e\n\u003cli\u003eJohn Deere: 26G, 27D, 30G, 35G, 35D, 15, 17, 20, 55, 52, 48, 60, 70, 75, 80, 120, 130, 110, 115, 150, 160, 200, 210, 225, 230, 240, 250, 270, 290, 330, 350, 450, 480, 490D, 490E, 690D, 690E, 790E, 792D, 892D, 892E, 992D, 992E, 290D, 290E, 190D, 190E\u003c\/li\u003e\n\u003cli\u003eHitachi: EX22, EX25, ZX27, UE30, EX35, EX40, EX50, EX55, ZX15, ZX17, ZX20, ZX25, ZX30, ZX35, ZX36, ZX40, ZX45, ZX48, ZX50, ZX52, ZX55, ZX60, ZX70, ZX75, ZX80, ZX85, ZX110, ZX120, ZX130, ZX150, ZX160, ZX180, ZX200, ZX210, ZX230, ZX240, ZX250, ZX27-0, ZX330, ZX350, ZX360, ZX470, ZX480, ZX500, ZX520\u003c\/li\u003e\n\u003cli\u003eJCB: 802, 803, 804, 8025, 8027, 8030, 1CX, 2CX, JS50, JS70, JS130, JS200, JS210, JS220, JS330, JS350, JS450\u003c\/li\u003e\n\u003cli\u003eKobelco: SK20, SK24, SK25, SK27, SK30, SK35, SK40, SK45, SK48, SK50, SK55, SK60, SK70, SK80, SK100, SK120, SK115, SK130, SK135, SK140, SK150, SK160, SK200, SK210, SK220, SK230, SK250, SK260, SK300, SK330, SK350, SK360, SK400, SK450, SK480\u003c\/li\u003e\n\u003cli\u003eKomatsu: PC20, PC25, PC27, PC28, PC30, PW30, PC35, PC38, PC10, PC15, PC18, PC40, PC45, PC55, PC56, PC60, PC70, PC75, PC78, PC90, PC100, P120, PC128, PC130, PC138, PC150, PC160, PC200, PC210, PC220, PC228, PC250, PC300, PC320, PC350, PC360, PC400, PC450, PC460\u003c\/li\u003e\n\u003cli\u003eKubota: KH60, KH61, KH66, KH71, KX71, KX91, KX121, KX151, KX161, U10, U15, U17, U20, U25, U30, U35, U40, U45, U50, U55, KX080-3, KX080-4\u003c\/li\u003e\n\u003cli\u003eNew Holland: EC25, EH27, EH17, EH15, EH35, EH45, EH55\u003c\/li\u003e\n\u003cli\u003eTakeuchi: TB25, TB26, TB28, TB125, TB23R, TB225, TB015, TB245, TB260, TB275\u003c\/li\u003e\n\u003cli\u003eVolvo: EC20, EC30, EC48, EC58, EC55, ECR58, EC70, EC80, EC130, EC140, EC210, EC220, EC240, EC290, EC300, EC360, EC450, EC480\u003c\/li\u003e\n\u003cli\u003eWacker Neuson: 1403, 1404, 1503, 1903, 2203, 2503\u003c\/li\u003e\n\u003cli\u003eYanmar: B19, B22, B201, VIO20, VIO15, VIO17, VIO25, VIO30, VIO35, VIO40, VIO45, VIO50, VIO70\u003c\/li\u003e\n\u003cli\u003eSamsung: SE130, SE210, SE240, SE290, SE350, SE450, MX80\u003c\/li\u003e\n\u003cli\u003eHyundai: R55, R40, R35, R15, R20, R60, R80, R110, R120, R130, R140, R150, R200, R210, R215, R220, R225, R230, R235, R280, R290, R320, R305, R350, R360, R400, R450, R480\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42495938953349,"sku":"FN26110225","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/steel-bucket-bushing-55x68x55mm-for-excavatorsfab-heavy-parts-8696097.jpg?v=1794379148"},{"product_id":"80mm-80x100x95mm-bushing-sleeve-bush-for-h-link-rod-link-1","title":"Bushing Sleeve 80x100x95 mm for Excavator H Link and Rod Link","description":"\u003ch2\u003eBushing Sleeve 80 × 100 × 95 mm — For Excavator H Link and Rod Link\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket bushing sleeve for excavator pivot connections, providing a replaceable bearing surface between the pin and housing. Includes 1 piece.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eDimensions: 80 × 100 × 95 mm\u003c\/li\u003e\n\u003cli\u003eInner Diameter: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCross-reference part numbers not specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcavator H link and rod link connections\u003c\/li\u003e\n\u003cli\u003eExcavator arm, boom, bucket, and hydraulic cylinder connections\u003c\/li\u003e\n\u003cli\u003eSpecific makes, models, and year ranges not specified.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42497882980485,"sku":"FN26110599","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/bushing-sleeves-3037286-85x100x95-mm-for-hitachi-ex120-zx120-zx135usfab-heavy-parts-7008519.jpg?v=1794379148"},{"product_id":"2pcs-80mm-80x95x95mm-bushing-sleeve-bush-for-h-link-rod-link","title":"Bushing Sleeves 80x95x95 mm for H Link and Rod Link","description":"\u003ch2\u003e Bushing Sleeves 80 × 95 × 95 mm — For H Link and Rod Link\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket bushing sleeves for H link and rod link pivot connections, providing replaceable bearing surfaces between the pins and housings. Includes a set of 2 sleeves.\u003c\/p\u003e\n\u003ch3\u003ePart Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: New, Aftermarket\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 80 × 95 × 95 mm\u003c\/li\u003e\n\u003cli\u003eInner Diameter: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatible Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eH link and rod link connections\u003c\/li\u003e\n\u003cli\u003eSpecific makes, models, and year ranges not specified.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fab Heavy Parts","offers":[{"title":"Default Title","offer_id":42498092007557,"sku":"FN26110604","price":64.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0373\/4886\/8229\/files\/bushing-sleeves-3037286-85x100x95-mm-for-hitachi-ex120-zx120-zx135usfab-heavy-parts-7008519.jpg?v=1794379148"}],"url":"https:\/\/www.fabheavyparts.com\/en-ie\/collections\/80mm-id-excavator-bushings.oembed","provider":"Fab Heavy Parts","version":"1.0","type":"link"}