How to Change the CAT 320 Air Filter?

How to Change the CAT 320 Air Filter?

 

The air filter in your CAT 320 excavator plays a crucial role in preventing dust and dirt from infiltrating your machine's systems. Whether you choose to purchase new air filters directly from the manufacturer or opt for aftermarket parts, it is essential to know the correct filter to buy. In this guide, we will walk you through the steps to replace the air filter in your CAT 320 excavator.

 

 

Locate the Air Filter

The air filter in the CAT 320 is positioned behind the cab, right behind the door. Please note that the location may vary depending on the machine model. While some equipment features two air filters, the CAT 320 is equipped with a single filter housed in the designated compartment.

Unbuckle the Clips

The air filter housing cap is secured by three clips. To access the air filter, you must unbuckle all three clips, allowing the cap to be removed.

Remove the Filter 

In certain machines, the filter may have a wingnut in the center that needs to be unscrewed. However, the CAT 320 does not have a wingnut. To remove the filter, gently wiggle and twist it until it comes loose.

Clean the Housing 

After removing the outer air filter, you will notice an inner safety filter still inside the machine. Leave this filter in place while cleaning the dust accumulated within the housing. The safety filter acts as a barrier, capturing any contaminants and preventing them from reaching deeper into the machine. Once you have thoroughly cleaned the housing, proceed by removing the secondary filter.

Compare the Old and New Filters

 Before installing the new inner filter, compare it to the old filter to ensure they share the same size opening. This is crucial for proper fitting and a complete seal. Apply gentle pressure to secure the safety filter in place, and then insert the outer filter.

Install the New Filters 

Ensure that the inside of the cap is free from dirt and grime before reinstalling it. Secure the cap by latching the three buckles. Remove the one-way check valve and carefully remove any dirt or dust. Once cleaned, reattach the one-way valve check to the cap.

By following these steps, you can easily replace the air filter in your CAT 320 excavator, ensuring optimal performance and longevity for your machine

 

Popular Air Filter for Caterpillar

Air Filter Kit 142-1339 and 142-1404 for Caterpillar 

Enhance the performance of your beloved Caterpillar CAT E330C, 330D, 330CL, 336DL, 336E, and 336F with the remarkable Air Filter Kit 142-1339 and 142-1404. Experience a breath of fresh air as these top-notch filters effortlessly purify and optimize the engine's performance. With their exceptional quality and compatibility, these kits are precisely engineered to deliver unparalleled results. Don't settle for anything less than excellence - equip your Caterpillar machine with the Air Filter Kit 142-1339 and 142-1404 and unleash the true power within.

 

Air Filter Kit 146-7473 1467473 Fits CAT Caterpillar

Introducing the Air Filter Kit 146-7473 - the ultimate accessory for your CAT Caterpillar 303.5, 302.5, 303C, 304C, 305D, and 903C machines! With its exceptional filtration capabilities, this kit ensures that your equipment stays in prime condition, delivering optimal performance every time.

Designed with precision and engineered to perfection, the Air Filter Kit 146-7473 is a true game-changer. It effectively traps dust, dirt, and debris, preventing them from infiltrating your machine's engine and causing potential damage. Say goodbye to costly repairs and hello to uninterrupted productivity!

Experience the difference that the Air Filter Kit 146-7473 can make in your CAT Caterpillar machines. Don't settle for anything less than the best - invest in this top-notch accessory today and enjoy the peace of mind that comes with knowing your equipment is well-protected.

Upgrade your CAT Caterpillar 303.5, 302.5, 303C, 304C, 305D, or 903C with the Air Filter Kit 146-7473 - because when it comes to quality, performance, and reliability, nothing beats the CAT brand.

 

FAB Heavy Parts Can Help With Your Needs

Welcome to Fab Heavy Parts' online catalog, where you can explore a delightful array of air filters replacements fit Caterpillar for your tractor,loader, excavator, truck,etc..  We have a diverse selection to cater to your needs. Our knowledgeable parts team is at your disposal, ready to assist you every step of the way.

Leave a comment

Please note: comments must be approved before they are published.