Discover the crucial joystick patterns that govern the movement of the boom, bucket, dipper, and swing during excavator operations. Unveil the distinction between the two primary operator control patterns, ISO and SAE, to enhance your proficiency. Explore indispensable excavator safety guidelines to ensure a secure working environment.
ISO vs. SAE: Excavator Joystick Control Patterns
When operating an excavator, it is crucial to understand the two main control patterns: ISO and SAE. The International Organization for Standardization (ISO) and the Society of Automotive Engineers (SAE) have established these patterns, each with its own characteristics and applications.
ISO, also known as "CAT controls" or "excavator controls," is the more prevalent pattern worldwide. It employs the right-hand lever to manage the boom and bucket, while the left-hand lever controls the dipper (stick) and swing movements. On the other hand, SAE, often referred to as "John Deere Controls" or "backhoe controls," is a standard in the United States. In SAE pattern, the right-hand lever operates the dipper (stick) and bucket, while the left-hand lever controls the boom and swing.
For operators working with different machines or preferences, newer excavator models may feature a lever to switch between the ISO and SAE control patterns. This lever could be located under the cab's floorboard or behind a panel for easy access.
It is essential to familiarise yourself with the control pattern your machine uses. Typically, there is a reference card on the equipment that indicates the specific control pattern being employed. By understanding and adapting to these control patterns, operators can efficiently and effectively operate excavators according to the established industry standards.
ISO Controls
Discover the ISO Controls, the standard operator control setup for efficient operation. Follow this pattern for seamless control:
Left-hand lever (dipper and swing):
- Toward you: Bring dipper (stick) towards you
- Away from you: Extend dipper (stick) away from you
- Left: Swing left
- Right: Swing right
Right-hand lever (boom and bucket):
- Toward you: Raise the boom
- Away from you: Lower the boom
- Left: Curl bucket in (to close)
- Right: Curl bucket out (to dump materials)
SAE Controls
Explore the unique SAE Controls pattern, distinct from the ISO standard. With SAE, the left-hand Joystick operates the boom and swing, while the right-hand joystick manages the dipper and bucket. Note that both standards share the left-hand joystick for swing control. The SAE pattern entails:
Left-hand lever (boom and swing):
- Toward you: Raise the boom
- Away from you: Lower the boom
- Left: Swing left
- Right: Swing right
Right-hand lever (dipper and bucket):
- Toward you: Bring dipper towards you
- Away from you: Extend dipper away from you
- Left: Curl bucket in (to close)
- Right: Curl bucket out (to dump materials)
How to Operate an Excavator
To operate an excavator safely and effectively, it is essential to follow a set of important steps. Prior to entering the excavator, ensure that the door is securely locked to the side of the machine. This will not only allow you to use the handle to climb in safely but also prevent the wind from unexpectedly closing the door against you. As you climb into the cab, maintain three points of contact to ensure stability and prevent any accidents.
Once inside the cab, adhere to the following guidelines:
- Always fasten your seat belt first to prioritize safety.
- Release the door lock and securely close the door to maintain a controlled environment within the cab.
- Familiarize yourself with the various controls of the excavator before commencing operation to ensure smooth and efficient handling of the machine.
By carefully following these steps, you can operate the excavator with confidence and precision, promoting a safe working environment for yourself and those around you.
Driving and Parking
Operating an excavator involves a series of crucial steps to ensure safety and efficiency. Before initiating any movement with the excavator, it is essential to adhere to the following guidelines:
- Start the excavator by turning the key in the ignition.
- Check the display for any error codes and confirm the availability of an adequate fuel supply.
- Engage the safety lock lever to prevent the controls from functioning while the excavator is locked.
The excavator is equipped with two track pedals, each corresponding to a track. These pedals can be operated using both hand controls and foot pedals, allowing for versatility in control. To move the excavator forward, push both track pedals forward, and to move in reverse, pull both pedals back. Steering and manoeuvring the excavator require a combination of pedal operations. For optimal control, ensure that the cab is aligned with the tracks for a clear orientation.
When it comes to parking the excavator, follow these steps:
- Lower the bucket to the ground.
- Lower the safety lock lever.
- Turn off the power by using the key.
Digging and Trenching
To maximise stability during excavation, maintain a straight line alignment. Follow these steps to effectively operate the excavator bucket:
- Extend the dipper/stick and bucket fully, then lower it to approximately a foot above the ground.
- Position the bucket teeth downwards, lower it to penetrate the ground, and subsequently curl the bucket to dig and collect material.
- Elevate the bucket to a height of five to six feet, then pivot either left or right to discharge the contents.
- Repeat the process.
With increasing proficiency, utilise both levers simultaneously to skim a thin layer from the ground surface.
Backfilling
For efficient backfilling, simply reverse the digging process. Remember to keep the bucket closer to the ground this time. To speed up the process, try scraping and swinging simultaneously. You may also flatten the bucket and utilize its back or side to push material into the hole while swinging back or sideways. Be cautious with heavy loads or excessive material.
Grading
When it comes to altering the grade or slope of a piece of land, an excavator proves to be an invaluable tool for various applications, whether it be preparing a construction site or directing the flow of water in a specific direction. This task can be accomplished by utilising the excavator bucket or a grading attachment, with the following meticulous steps to guide you through the process:
- Begin by positioning the bucket in a downward direction and gently raking the ground with the bucket to loosen the soil effectively.
- Proceed by pulling the bucket straight back along the ground, allowing it to scrape and accumulate the material to the designated area for elevation. Utilise the bottom of the bucket to evenly distribute the material.
- Maintain a steady angle with the bucket to ensure a consistent and uniform grade throughout the entire area, thereby achieving precision and accuracy in the grading process.
Are Backhoe and Excavator Controls the Same?
While many modern excavators and backhoes can operate with both SAE or ISO controls, historically, backhoes usually used SAE controls and excavators ISO controls. Today, although backhoes and excavators may share the same joystick control pattern, the overall operational controls differ between the two machines. Control systems also vary depending on the manufacturer and specific machine model. Additionally, due to the front loader and wheels on a backhoe, the driving pedals and controls are distinct from those on an excavator equipped with tracks.
Popular Joystick Controllers
1. Joystick Controller for Volvo
Joystick Controller 14556359 14556360 Fits for Volvo EC140B EC160B EC180B EC200B EC210B EC240B EC290B EC330B EC360B EC460B
Part Number: VOE 14556360, VOE14556360, 14556360, VOE 14556359, VOE14556359, 14556359
Applications:
Fits Volvo Excavator:
EC140B, EC160B, EC180B, EC200B, EC210B, EC240B, EC290B, EC330B, EC360B,
EC460B, EC55B, EC55D, EC60D, EC700B, EW145B, EW55B, EW60C
Condition: new, aftermarket
Enhance your gaming experience with the Joystick Controller compatible with Volvo vehicles. Designed to fit models 14556359 and 14556360, this controller ensures smooth and precise control while navigating virtual worlds. Upgrade your gaming setup with this high-quality accessory tailored for Volvo enthusiasts.
2. Joystick Controller for Manitou
Joystick Controller 679253 Fits for Manitou 160ATJ 165ATJ 180ATJ 200ATJ
Part Number: 679253
Applications:
Fits for Manitou 160ATJ 165ATJ 180ATJ 200ATJ
Condition: new, aftermarket
Upgrade your gaming experience with the Joystick Controller 679253 designed to perfectly fit the Manitou 160ATJ, 165ATJ, 180ATJ, and 200ATJ models. Enhance your precision and control as you navigate through your virtual worlds with ease. Say goodbye to clunky controls and hello to seamless gameplay with this top-of-the-line joystick controller. Elevate your gaming setup today!
3. Joystick Controller for Hyundai
New Joystick Controller Fits for Hyundai Excavator R210LC-3
Applications:
Fits for Hyundai Excavator R210LC-3
Condition: new, aftermarket
Enhance your Hyundai Excavator R210LC-3 with the latest Joystick Controller! This cutting-edge controller is designed to perfectly fit your excavator, ensuring precise and effortless operation. Upgrade your equipment with this top-of-the-line accessory for improved performance and control.
4. Joystick Controller for Caterpillar
Joystick Controller 206-2408 Fits for Caterpillar CAT Engine 3176C 3306 3116
Excavator 345B 330B 325B 320B
Replace Part Number: 206-2408, 2062408, CA2062408
Fits for Caterpillar CAT Engine: 3176C, 3306, 3116
Condition: new, aftermarket
Application:
Fits for Caterpillar CAT Excavator:
345B, 345B L, 345B LC, 330B, 330B L, 330B LN, 325B L, 325B LN, 322B L, 322BLN, 320B, 320B L, 320B LN, 320B N, 320B S
Enhance your Caterpillar CAT engine control with the Joystick Controller 206-2408, compatible with models such as the 3176C, 3306, and 3116. This versatile controller is designed to fit excavators like the 345B, 330B, 325B, and 320B. Upgrade your equipment with precision and reliability by incorporating this joystick controller into your machinery.
FAB Heavy Parts Can Help With Your Needs
Welcome to Fab Heavy Parts' online catalog, where you can explore a delightful array of Joystick Controllers. We have a diverse selection to cater to your needs. Our knowledgeable parts team is at your disposal, ready to assist you every step of the way.