Ordering with us Today and Become a FAB VIP.Rewards&VIP

Get $50 Off Final Drive Travel Motors Shop Final Drive

Get 10% off at checkout on tool box, floor jack, engine hoist, shop press, oil drain pan, wrench set, porta power kit Shop Tools

Understanding Common Rail Injector Failures: Causes and Symptoms

Understanding Common Rail Injector Failures: Causes and Symptoms

Today's common rail injectors represent a remarkable advancement in automotive technology, engineered for durability and efficiency. However, despite their robust construction, these injectors face challenges due to their demanding operational environment.

Designed to perform multiple injections within a single combustion cycle, these injectors operate under sub-micron tolerances, ensuring precise fuel delivery. They also endure operating pressures exceeding 2,000 bar, which adds to their complexity and performance demands.

This combination of high-frequency injections and extreme pressures means that, while they are built to withstand significant stress, they are also more susceptible to wear and tear over time. As a result, regular maintenance and monitoring are essential to ensure their longevity and optimal performance in modern engines.

 

Understanding the Reasons Behind Common Rail Injector Failures

Common rail injectors are vital components of modern diesel engines, yet they can encounter various issues leading to failure. Here are the primary causes of injector malfunction:

  • Particle contamination:Invisible particles can bypass filtration systems, causing erosion in critical components such as the control valve and nozzle assembly. This erosion compromises the injector’s ability to accurately meter fuel, which subsequently disrupts the timing and distribution of fuel into the engine cylinder.
  • Water contamination:Excessive water in fuel can lead to corrosion of metal surfaces, block filters, and diminish the fuel’s lubricating properties, ultimately shortening the lifespan of essential components. Additionally, water can promote the growth of diesel bug, which further damages the fuel and associated components.
  • Heat soak: When fuel remains in the injector after the engine is turned off, it can become 'baked' onto the injector due to residual heat. Over time, these deposits accumulate and clog the injectors, interfering with the quantity and timing of fuel injection.
  • Poor installation:Issues such as incorrect torque settings or improperly seated sealing rings can lead to unnecessary wear and tear on injectors.
  • Solenoid failure:A short circuit resulting from a faulty engine control unit (ECU), damaged wiring loom, or water ingress can impair the solenoid. Additionally, piezo crystals within the injectors are highly sensitive to vibrations, and any mishandling or damage can cause operational issues.
  • Engine blow-by:Ideally, a vehicle’s Positive Crankcase Ventilation (PCV) system should remove any blow-by gases. If this system malfunctions or if the filter fails to capture these gases, fuel and oil residues may accumulate and clog the injectors.
  • Broken or leaking fuel injector:Although rare, cracks can develop in the nozzle or cap nut. Engine heat may also render o-rings brittle, leading to leaks that hinder the delivery of the fuel-air mixture to the engine.
  • Faulty ECU:Any issues with the vehicle’s ECU can prevent it from accurately directing the fuel injectors on how to mix and deliver air and fuel to the combustion chamber. While this problem does not originate from the injectors themselves, it can produce similar operational challenges. In some cases, the injector drive circuit within the ECU may fail, causing a short circuit that damages the injector solenoid.

 

Identifying Symptoms of a Malfunctioning Common Rail Injector

A malfunctioning fuel injector can significantly compromise your vehicle's performance, emissions, and fuel efficiency. It is crucial to be aware of the following key indicators that may suggest an issue:

  • Check Engine Light:Any irregularity in the injectors or fuel system can activate the engine management light, signalling the need for immediate attention.
  • Engine Knock:An audible knocking sound emanating from the engine compartment may indicate a misalignment in the combustion timing, leading to premature detonations.
  • Rough Running:Inadequate or inconsistent fuel supply can result in a drop in RPM during idle, leading to a rough idling experience. Should the RPM decrease excessively, there is a risk of stalling.
  • Engine Misfire:Insufficient fuel delivery may prevent the cylinders from generating adequate power, resulting in misfires and sluggish acceleration.
  • Engine Surge:A defective injector may over-supply fuel, causing the engine to surge and hindering smooth acceleration. In such cases, the engine RPM will fluctuate under constant load.
  • Fuel Leak:Visible damage to the injector can lead to fuel leaks. A quick visual inspection may reveal fuel on the injector or fuel rail. Over time, a hardened black residue may accumulate near the injectors.
  • Unpleasant Odour:A discernible diesel smell may indicate a leak or a stuck open injector. Additionally, a microbial infestation could produce a distinct rotten egg odour.
  • Poor Fuel Economy:If the engine is not receiving the optimal amount of fuel for combustion, the Engine Control Unit (ECU) will compensate by supplying more fuel, resulting in a rich running condition and unnecessary fuel wastage.
  • Exhaust Smoke:A malfunctioning injector can lead to incomplete or uneven fuel combustion, resulting in elevated emissions and visible exhaust smoke. Drivers may observe either black or white smoke, depending on the specific nature of the injector failure.

 

A Comprehensive Guide to Diagnosing Common Rail Injector Faults

Diagnosing common rail injector faults can seem daunting, but with a systematic approach, you can effectively identify the underlying issues. If you or your customer have observed symptoms indicative of injector problems, the following diagnostic checks will assist in pinpointing the root cause:

- Identify the Fault Code: Begin by connecting an OBD diagnostic scan tool to the vehicle. The check engine light may illuminate due to various reasons, so confirming the specific fault code is essential for targeted troubleshooting.

- Examine the Injectors: If the scan reveals a fuel injection system fault code, such as uneven combustion, unstable idle speed, maximum fuel injector trim deviation, low rail pressure, injector short circuit, or injector learn error, proceed to assess the injectors. Conduct a back leak flow test to determine which injector(s) may be malfunctioning.

- Assess Rail Pressure: Utilize an EOBD tool or a dedicated sealed rail diagnostic kit to measure the pressure of the common rail pump during engine cranking. If the reading deviates from the expected range for the specific vehicle, this may indicate a fault with the pump. Further diagnostics will be necessary to ascertain whether the issue is mechanical or electrical in nature.

- Test the Injectors' Electrical Functionality:

 - For typical DC wound coils (such as those from Delphi, Denso, and some Bosch models), employ a multimeter to evaluate the resistance, ensuring the electrical integrity of the injector. A ground to earth check can also be performed to detect coil breakdown, utilising more advanced diagnostic tools for thorough analysis.

- For piezoelectric injectors (including certain models from Continental and Bosch), specialized hardware is required to conduct an electrical diagnosis of the solenoid.

By following these steps diligently, you can streamline the diagnostic process, ultimately saving both time and money for you and your customer. This approach ensures adherence to best practices in injector servicing, enhancing overall efficiency and reliability.

 

Popular Common Rail Injector

 

1.  Common Rail Injector for Isuzu

Common Rail Fuel Injector 8982191810 Fits for Isuzu Engine 4HK1 6HK1 Truck FTR

Condition: Remanufactured

Replace Part Number: 8982191810, 8-98219181-0, 095000-9800, 0950009800

Fits for Isuzu Engine: 4HK1, 6HK1

Applications: Fits for Isuzu Truck:FTR

Elevate your engine's performance with the meticulously crafted Common Rail Fuel Injector 8982191810, specifically designed to fit Isuzu 4HK1 and 6HK1 truck engines. This essential component ensures optimal fuel delivery, enhancing efficiency and power for your heavy-duty vehicle.

 

2.  Common Rail Injector for Hyundai

Common Rail Fuel Injector 33800-84700 BEBE4L00001 BEBE4L00002 63229473 Fits for Hyundai L Engine With EGR

Part Number:
63229473,33800-84700,3380084700,BEBE4L00001,BEBE4L00002

Applications:
Fits for Hyundai L Engine With EGR

Experience enhanced efficiency and reliability with this exceptional fuel injector, tailored specifically for your Hyundai L engine. Engineered for optimal performance, it ensures smooth operation and maximises fuel efficiency while meeting stringent emission standards. Upgrade your vehicle's fuel system with this premium component, designed to deliver superior performance and longevity.

 

3.  Common Rail Injector for Caterpillar

Common Rail Fuel Injector 557-7637 Fits for Caterpillar CAT Engine C9

Condition: new, aftermarket

Replace Part Number: 557-7637, 5577637, CA5577637

Applications:
Fit for Caterpillar CAT Engine:C9

Elevate the performance of your Caterpillar CAT Engine C9 with our expertly crafted Common Rail Fuel Injector 557-7637. Designed to ensure optimal fuel delivery and enhance engine efficiency, this injector is a vital component for maintaining peak performance.

 

4.  Common Rail Injector for Komatsu

Common Rail Injector 095000-6290 6245-11-3100 Fits for Komatsu SAA6D170E Engine

condition: new, aftermarket

Part Number: 095000-6290, 6245-11-3100,

Application: Fits For Komatsu SAA6D170E Engine

Enhance the performance of your Komatsu SAA6D170E engine with the reliable Common Rail Injector 095000-6290 6245-11-3100. This high-quality component ensures optimal fuel efficiency and powerful operation, making it an essential part for maintaining the peak performance of your machinery.

 

FAB Heavy Parts  Can Help With Your Needs

Welcome to Fab Heavy Parts' online catalog, where you can explore a delightful array of common rail injector.  We have a diverse selection to cater to your needs. Our knowledgeable parts team is at your disposal, ready to assist you every step of the way.

Leave a comment

Please note: comments must be approved before they are published.