Ordering with us Today and Become a FAB VIP.Rewards&VIP

Get $50 Off Final Drive Travel Motors Shop Final Drive

Get 10% off at checkout on tool box, floor jack, engine hoist, shop press, oil drain pan, wrench set, porta power kit Shop Tools

Avoid These 5 Common Mistakes When Operating a Floor Jack

Avoid These 5 Common Mistakes When Operating a Floor Jack

Using a floor jack can often feel like a rite of passage for anyone who owns a vehicle. Whether you are a seasoned car enthusiast or navigating the roads as a new driver, mastering this essential tool is crucial for every vehicle owner.

A floor jack, also known as a hydraulic jack or car jack, is a hand-operated hydraulic device designed to lift vehicles safely. Its versatility extends beyond vehicles, as it can also be employed to elevate components such as engines, transmissions, and rear axle assemblies.

While most vehicles are equipped with a basic toolkit that includes a lightweight bottle jack or scissor jack, these tools are primarily intended for emergency situations, such as changing a flat tire on the roadside. For more extensive vehicle repairs, utilising a floor jack in conjunction with jack stands is a significantly safer option.

To ensure your weekend repair projects are executed without incident, it is important to be aware of common pitfalls. Here are five mistakes to avoid when using a floor jack:

 

Lifting a vehicle that exceeds the jack’s capacity

Before you embark on the task of lifting a vehicle, it is imperative to thoroughly assess the weight capacity of your floor jack. This crucial step ensures not only the efficiency of the lifting process but also the safety of the operation.

It is advisable that your floor jack is rated to lift significantly more than three-quarters of your vehicle's total weight. Attempting to lift a vehicle that exceeds the jack’s rated capacity poses serious safety risks. In scenarios where the vehicle's weight surpasses the jack's limit, the built-in safety mechanisms may activate, preventing the jack from lifting altogether.

Additionally, the importance of using appropriately rated jack stands cannot be overstated. These stands must be capable of supporting the weight of the vehicle securely. Failure to adhere to these guidelines could result in equipment failure and pose a danger to anyone in the vicinity. Always prioritise safety by ensuring that your lifting equipment is suitable for the task at hand.

 

Using a floor jack as the only vehicle support

When lifting a vehicle, it is crucial to understand the importance of using a floor jack correctly to ensure safety. A common misconception is that a floor jack can serve as the sole support for a vehicle. However, this practice poses significant safety risks.

A floor jack is designed specifically for lifting and should not be relied upon as the only means of support. Its stability is insufficient for safe work beneath a vehicle. Therefore, the use of jack stands is essential. After the floor jack has elevated the vehicle to the desired height, jack stands must be positioned securely underneath.

Once the vehicle is safely lowered onto the jack stands, the floor jack may be adjusted to serve as an additional safety measure. However, it is imperative that the jack does not bear any load at this point. This precaution ensures that, in the event of a jack slip or hydraulic failure, the vehicle will remain securely supported by the jack stands, thereby preventing any potential accidents or injuries.

Prioritising safety by adhering to these guidelines will help create a secure working environment when performing maintenance or repairs on your vehicle.

 

Improvising a jack extension

When it comes to lifting heavy vehicles, safety should always be your top priority. While resourcefulness is a commendable trait, it is essential to exercise caution when dealing with equipment such as a floor jack rated at 5,000 lbs. Attempting to modify or extend this tool to lift a 12,000 lb. truck is not advisable.

If your floor jack cannot reach the chassis of your SUV or truck, do not resort to placing it on makeshift supports like plywood or bricks. Such improvisations can lead to dangerous situations, including equipment failure or personal injury.

Instead, always opt for a heavy-duty floor jack that is specifically designed to accommodate the minimum height and maximum lift needed for your vehicle. This ensures not only your safety but also the integrity of the lifting equipment. Choose tools that meet the necessary specifications for your vehicle's weight and dimensions, and avoid any shortcuts that could compromise your well-being.

 

Using a jack on an incline

When it comes to using a jack on an incline, caution is paramount. Working on sloped surfaces poses significant risks, as there is a possibility that your vehicle may tip over while being lifted. To ensure safety, it is essential to take the following precautions:

First and foremost, always make certain that your vehicle is securely in “park” and that the parking brake is fully engaged before you commence any repairs. This simple step can prevent unintended movement and potential accidents.

It is also crucial to be aware of the jack's mechanics. If anything obstructs the wheels of the jack's body, it can hinder its ability to move freely during the lifting process. This obstruction may cause the jack’s cradle to shift, potentially losing contact with the load point, which could result in the vehicle descending unexpectedly.

To mitigate these risks, only lift your vehicle on a flat, stable surface. Additionally, it is advisable to block the wheels that are not being worked on using a wedge or a wheel chock. This precautionary measure serves as an additional layer of security, in the event that the brakes fail.

By adhering to these safety guidelines, you can ensure a more secure and efficient experience when working on your vehicle.

Pro Tip:

It is essential to recognise that as the jack elevates the vehicle, the jack's body must be able to roll smoothly on the surface beneath it. Therefore, the supporting surface should be flat, level, and free from cracks or other obstructions that could impede the movement of the jack's metal wheels, ensuring safe and efficient operation while raising the vehicle.

 

Ignoring designated jack points

When it comes to lifting your vehicle, adhering to the designated jack points is paramount. These specific areas of your vehicle’s chassis are reinforced for safety and stability, ensuring that the lift is both secure and effective. Ignoring these designated points can lead to serious consequences, including damage to weaker metal structures that may not be able to withstand the weight and pressure. Such damage can result in costly repairs that could easily have been avoided.

Moreover, lifting your vehicle from improper locations significantly increases the risk of the jack slipping. This not only poses a danger to you but can also result in further damage to your vehicle. The jack points specified for the equipment that came with your vehicle are also suitable for use with a floor jack, providing versatility in your lifting options. Always take the time to locate and familiarise yourself with these designated areas to ensure a safe and efficient lifting process. Prioritising safety will save you time, money, and potential hazards in the long run.

 

Popular Floor Jack

 

1. 

3-Ton Quick Rise Aluminum Floor Jack with Dual Pump Pistons & Reinforced Lifting Arm
Specifications
Main Color: Blue
Main Material: Aluminum
Rated Capacity: 3T Dual pump
Dimensions & Weights
Assembled Length (in.) : 25.59
Assembled Width (in.) 12.60
Assembled Height (in.) : 9.17

Weight (lbs) : 67.24

Experience the ultimate in efficiency and strength with our 3-Ton Quick Rise Aluminium Floor Jack. Engineered with dual pump pistons for rapid lifting, this jack ensures you can elevate your vehicle with ease. The reinforced lifting arm provides added durability, making it a reliable choice for all your lifting needs.

 

2.

4 Ton Low Profile Heavy-Duty Steel Racing Floor Jack with Dual Piston Quick Lift Pump Lifting Range 4"-21"
Specifications
Main Color: Black+Blue
Main Material: Steel
Rated Capacity: 4T Dual pump
Lifting Range: Lifting range 4"-21"
Dimensions & Weights
Assembled Length (in.) : 29.57
Assembled Width (in.) 14.17
Assembled Height (in.) : 6.38

Weight (lbs) : 97.00

4 Ton Low Profile Heavy-Duty Steel Racing Floor Jack, engineered for performance and efficiency. This robust jack features a dual piston quick lift pump, enabling swift elevation of your vehicle with a lifting range of 4 inches to 21 inches. Designed for durability and ease of use, it’s the perfect companion for both racing enthusiasts and everyday mechanics.

 

3. 

Floor Jack 1.5 Ton Hydraulic Low Profile Aluminum and Steel Car Lightweight Service with Quick Lift Dual Pump 3,000 lbs Capacity
Specifications
Main Color: Green
Main Material: Aluminum
Rated Capacity: 1.5T Dual pump
Dimensions & Weights
Assembled Length (in.) : 19.90
Assembled Width (in.) 9.80
Assembled Height (in.) : 8.00

Weight (lbs) : 31.90

Floor Jack, a remarkable 1.5 Ton Hydraulic Low Profile marvel crafted from a blend of lightweight aluminium and robust steel. Designed for effortless service, this jack boasts a quick lift dual pump mechanism, enabling rapid elevation of vehicles.

 

4.

22 Ton Hydraulic Floor Jack Air-Operated Axle Bottle with 4 Extension Saddle Set Built-in Wheels Red
Specifications
Main Color: Red
Main Material: Metal
Dimensions & Weights
Assembled Length (in.) : 23.20
Assembled Width (in.) 11.40
Assembled Height (in.) : 51.20

Weight (lbs) : 77.00

22 Ton Hydraulic Floor Jack, a remarkable air-operated axle bottle designed for efficiency and ease of use. Featuring a robust 4 extension saddle set, this jack ensures optimal lifting capability for your heavy-duty needs. Its built-in wheels provide seamless mobility, allowing you to manoeuvre with precision.

 

FAB Heavy Parts  Can Help With Your Needs

Welcome to Fab Heavy Parts' online catalog, where you can explore a delightful array of floor jack.  We have a diverse selection to cater to your needs. Our knowledgeable parts team is at your disposal, ready to assist you every step of the way.

Leave a comment

Please note: comments must be approved before they are published.