How Does a Turbo Blow Up? Understanding the Causes of a Turbocharger Explosion

Key Takeaways

• Explosive turbocharger failures, while rare in everyday vehicles, are a recognized risk in high-performance and competition engines.
• Turbochargers operate at extremely high speeds and temperatures, requiring robust materials and designs to prevent catastrophic wheel failures.
  
• The main causes of explosive turbo failures include overspeeding, fatigue failures, and ingestion of foreign objects.
• Proper engine oil flow and quality are critical to turbocharger health, preventing bearing damage and premature failure.
  
• Unbranded or low-quality turbochargers pose a higher risk of catastrophic failure due to inferior materials and construction.
  
• Regular maintenance, including oil changes and air filter checks, helps prevent turbo failure and extends turbocharger lifespan.
  
• Turbocharger manufacturers continuously innovate to improve durability and safety, including stronger casings and advanced materials.
  
• Awareness of turbo failure symptoms and causes can help drivers take timely action to avoid extensive engine damage.

 

In the realm of seasoned technicians, the journey through diagnosing and rectifying commonplace turbocharger malfunctions, such as excessive free play in shafts, bearings, and thrust washers resulting from inadequate lubrication, is a familiar path. Turbochargers are now widely used by car manufacturers to enhance car performance and fuel efficiency, making them a standard feature across many vehicle line-ups. Nonetheless, the terrain takes a thrilling turn when faced with the enigmatic spectacle of explosive failures involving shattered compressor and turbine wheels. In such instances, the root causes often lie concealed, demanding a meticulous unraveling of the intricate puzzle. Thus, within the confines of this discourse, we shall embark on a voyage delving into the intricacies of explosive turbocharger wheel failures, distinct from those devoid of the dramatic disintegration of rotating components. Our exploration commences with a pivotal inquiry:

 

How frequent are turbocharger explosions?

In the realm of high-performance, competition-grade engines, the occurrence of explosive turbocharger failures is a well-known risk. While these instances are not a concern for the majority of everyday drivers, it is crucial to acknowledge the potential dangers associated with such failures in competitive environments.

 

For the average consumer, the likelihood of a reputable branded turbocharger experiencing a catastrophic failure, commonly referred to as a “wheel burst,” is exceedingly low under normal operating conditions. This assumption is based on the premise that the engine is properly maintained, the fuel and engine management systems are in their standard configurations, the boost control system is functioning correctly, and the engine is operated within its recommended parameters.

 

Nevertheless, the landscape of modern passenger vehicle engines is evolving rapidly, marked by higher exhaust gas temperatures, engine speeds, and compression ratios compared to a decade ago. Turbochargers in these engines operate under high boost pressure and require robust cooling systems to manage the increased heat generated by more power output. After all, turbochargers can spin at incredibly high speeds, often exceeding 100,000 rpm, and can reach up to 250,000 rpm, which requires them to operate under high pressures and temperatures.

 

Recognising this trend, turbocharger manufacturers are continuously innovating and refining their designs to enhance durability and performance. This includes the development of new rotating-component designs and the utilization of advanced materials for construction. Moreover, significant investments are made in creating turbocharger casings that are more robust, ductile, and impact-resistant to contain any potential wheel bursts effectively. The additional air provided by a turbocharger increases the engine's efficiency and power output, enabling smaller engines to produce more power and improve fuel efficiency.

 

Unfortunately, the market is saturated with unbranded turbochargers that lack the quality assurance and reliability standards of reputable manufacturers. While these products may not pose a significant threat to original equipment markets, they present a considerable risk in the aftermarket sector. This raises important questions about the safety and reliability of turbochargers that do not carry the assurance of a trusted brand.

 

Discover the essence of an exlosive turbocharger wheel failure

In technical terms, the catastrophic failure of one or more turbocharger wheels occurs when the rapidly rotating compressor or turbine wheel is unable to withstand the combination of extremely high temperatures and immense centrifugal forces. A turbocharger operates by using exhaust gases to spin a turbine—this is how turbo work is achieved—which then drives a compressor that increases the amount of air entering the engine’s cylinders. This increased airflow allows more fuel to be burned in the cylinders, producing greater power output from the engine. Turbochargers are commonly used in both petrol and diesel engines to improve performance and efficiency.

 

Consider, for example, the rotating components of a modest turbocharger, commonly found in mid-range passenger vehicles, which can reach speeds exceeding 200,000 RPM in the presence of exhaust gases reaching temperatures as high as 900°C, or even higher. Turbos can spin at extreme speeds, often exceeding 200,000 RPM, and even minor interruptions in lubrication can lead to catastrophic results. Larger turbocharger units, typical in heavy-duty truck engines, can safely rotate at 90,000 RPM. Under such conditions, the structural integrity of the rotating parts is crucial in preventing the wheels from disintegrating. The compressor housing and turbine housing are critical components that protect and support the compressor and turbine wheels, respectively, under these high pressures and temperatures.

 

Practically speaking, the centrifugal forces that a turbine wheel must endure are directly proportional to the square of its rotational speed. However, even in reputable branded turbochargers, the strength of the wheel diminishes significantly beyond a certain maximum threshold. Therefore, the materials used in constructing turbocharger compressor and turbine wheels must possess the ability to withstand both the centrifugal forces resulting from high rotational speeds and the impacts of very high temperatures. It is noteworthy that temperature plays the most critical role in determining the likelihood of a turbocharger wheel experiencing an explosive failure, which can manifest in two ways. Oil is critical for reducing friction and cooling the central bearing in turbocharger applications, and a consistent oil flow is essential for maintaining bearing health, especially at such extreme speeds and temperatures. Oil starvation can occur in turbochargers even if there is oil in the engine, as it only takes a fraction of a second without oil to cause catastrophic damage to the turbo components.

 

- Blade Failures: These failures occur when the centrifugal forces exceed the structural integrity of the material comprising the wheel. The result is a blade being forcibly ejected from the hub, typically fracturing at the blade root. In cases where the failure happens on the compressor wheel, the detached blade can impact the turbocharger casing with sufficient force to cause the blade to shatter. On engines lacking intercoolers to contain the fragments, the blown fragments can inflict substantial damage to the engine.

 

- Hub Failures: These represent extreme instances of explosive failures, where the spinning hub disintegrates explosively into multiple large pieces along the wheel’s central axis. While the hub is sturdier than any individual blade, it is also significantly heavier. As the hub’s rotational axis aligns with its geometric centre, the stresses acting on the wheel are most intense around or near the hub’s centre. In some scenarios, a hub failure occurs immediately following a blade failure due to a critical imbalance resulting from the lost blade. Regardless of the specific trigger for a hub failure, the substantial mass of the spinning hub poses the greatest risk of causing extensive damage to the turbocharger casing, as it releases the most energy upon impact with the casing wall. Even minor interruptions in oil flow can cause severe bearing damage at these extreme speeds, leading to catastrophic turbocharger failure.

 

Most common causes of exlosive turbocharger failure

Over speeding

When it comes to turbocharger components, it is essential to understand the structural differences between aluminium compressor wheels and Inconel steel turbine wheels. The lower structural strength of aluminium in comparison to Inconel steel means that the limits at which compressor wheels fail are typically higher than those of turbine wheels.

 

Due to this difference in structural strength, the occurrence of compressor wheel failures is relatively more common than turbine wheel failures. Overspeeding, often caused by aftermarket tuning or a stuck wastegate, can result in excessive boost pressure and centrifugal force on the compressor wheel, leading to its failure. It is important to note that the wastegate should be connected directly to a boost pressure source and not to the intake manifold, as referencing the intake manifold can result in inaccurate pressure readings and improper wastegate operation. This overspeeding can also cause excessive wear on bearings and may even result in the shaft snapping. Beyond simply compressing intake air, a compressor wheel also transfers some of its inertia to the turbine wheel through the connecting shaft. This transfer of inertia significantly impacts the rotational speed of the turbine wheel.

 

In practical terms, if a compressor wheel fails or becomes detached from the shaft, the braking effect caused by compressing the intake air is lost. Consequently, the turbine wheel is no longer constrained and can rapidly accelerate beyond its maximum allowable speed. Furthermore, if the engine is operating at high speed at the time of the compressor wheel failure, the high-velocity exhaust gas can further accelerate the turbine wheel, potentially leading to a catastrophic failure of the turbine wheel. A failing turbo can also cause the vehicle to feel slow, with delayed response and reduced acceleration, which are key signs of turbo failure.

 

Fatigue failures

Metals and metal alloys possess a defined fatigue life, representing the total number of cyclical loads they can withstand before failing, despite the applied forces being insufficient to cause failure under static conditions. In the realm of turbocharger manufacturing, the structural integrity of aluminium is a critical consideration due to its relatively low strength compared to other materials. Reputable turbocharger manufacturers place great emphasis on addressing this inherent weakness of aluminium when developing new wheel designs. The challenge lies in the continuous acceleration and deceleration of an aluminium compressor wheel over numerous cycles, as this process can lead to low-cycle fatigue failures even at rotational speeds significantly below the maximum allowable limits.

 

In addition to fatigue concerns, excessive heat—especially during hot shutdowns—can cause oil to carbonize (coke) inside the turbo, forming hard deposits that block future oil flow and increase bearing wear.

 

While branded turbocharger producers adeptly navigate this delicate balance between durability and reduced turbo lag, thanks to the advantageous lower specific weight of aluminium, the landscape changes with cheap aftermarket turbochargers. These products may feature compressor wheels of substandard quality, often manufactured with flaws in the aluminium structure. Consequently, many instances of catastrophic failures in compressor wheels associated with unbranded turbochargers can be attributed to these structural deficiencies in the material used for their construction.

 

Ingestion of foreign objects

Foreign object ingestion can lead to significant damage in turbochargers. The extent of the damage depends on various factors, including the type, mass, and size of the object, as well as the point of entry into the turbocharger. Even small debris, such as dust, dirt, or tiny stones, can cause significant damage to the compressor wheel at high RPM, creating imbalances and reducing efficiency. A clean and properly maintained air filter is essential to prevent debris from entering the turbocharger’s compressor inlet and damaging the compressor wheels or turbine blades. Additionally, carbon deposits can build up inside the turbo or related components, reducing efficiency and increasing the risk of failure. The intercooler also plays a role in filtering debris and lubricants from turbo components, helping to prevent engine damage and maintain turbo performance. Typically, a small object may only result in the blades of the compressor wheel being torn off, leaving the hub relatively unscathed. For a foreign object to cause the hub to fail, it generally needs to be large enough to block the compressor wheel, potentially leading to subsequent failure of the turbine wheel.

 

When oil or debris enters the exhaust system due to turbo failure, it can cause blue or grey smoke to emit from the exhaust, which is a common sign of turbocharger problems. Exhaust leaks or smoke not only indicate turbo damage but can also lead to further engine issues. In such cases, the engine light or check engine light may illuminate, signaling the need for a professional inspection to diagnose whether the turbo or exhaust system is compromised. Additionally, abnormal sounds—such as whining or siren-like noises—can indicate issues with the turbo or exhaust system and should not be ignored.

 

In the case of exhaust valve failures, which are not uncommon in high-revving, modified engines, a broken valve fragment entering the turbocharger and making contact with the spinning turbine wheel can have catastrophic consequences. The turbine wheel is prone to violent explosions under such circumstances, often resulting in the breaking of the shaft. This, in turn, causes the rapidly rotating compressor wheel to attempt to force its way out of the casing through the air intake, a potentially dangerous scenario.

 

It is crucial to highlight that while compressor wheels typically do not exit the casing in one piece, the fragments possess energy levels several times higher than that of large-calibre rifle bullets. In situations where the turbocharger inlet is exposed, these high-energy fragments can pose a severe risk to bystanders or cause extensive damage to engine components if they rebound off a closed hood. Such risks underscore the importance of proper maintenance and vigilance in turbocharger operation to mitigate the potential dangers associated with foreign object ingestion.

 

Popular Turbochargers

 

1. Turbocharger for Kubota

Turbo 1C04117014, 1C041-17014 Turbocharger Fit for Kubota Engine V3300T

Part number: 49177-03130 49177-03160 49177-03140, 4917703130 4917703160 4917703140

OE number: 1G565-1701, 1G565-17012, 1G565-17013, 1G5651701, 1G56517012, 1G56517013, 1C04117014, 1C041-17014

Manufacture part number: 1G565-1701, 1G56517012, 1G565-17013, 1C040-1701, 1C0401701

Application:

Mitsubishi Pajero, L200, V3300-T

2001- Fits Bobcat S250 Skid Steer Loader, Kubota 3.3L, V3300-T

This turbocharger is an ideal fit for Kubota Engine V3300T. Its air compressor, exhaust turbocharger, and air pump help to boost engine power and reduce fuel consumption. Thanks to the advanced engineering and manufacturing, it provides long-lasting, reliable performance.

 

2.  Turbocharger for Caterpillar

Turbocharger 49179-02260 5I-7952 Fits for Caterpillar Excavator 320 320B 320N 318

Condition: new, aftermarket

Turbo model: TD06H-16M/14

Part number: 49179-02260, 4917902260

Manufacture part number: 5I7952, 5I-7952, 5I7585, 5I-7585

Application: Fits for Caterpillar 318C, 320, 320L, 320B, 320BL, 320N

Powered by 3066 engine

Enhance the performance of your Caterpillar Excavator 320, 320B, 320N, and 318 with the Turbocharger 49179-02260 5I-7952. This high-quality turbocharger is designed to boost the power and efficiency of your machinery, ensuring optimal performance on the job site. Trust in this turbocharger to deliver the power you need to tackle tough excavating tasks with ease. Upgrade your equipment today with this top-of-the-line turbocharger!

 

3. Turbocharger for Cummins

Turbo HX82 Turbocharger 4035862 4089809 4035863 4035864, Fits Cummins Engine QSKV60 

Part number: 4035862, 4089809, 4035863, 4035864

Engine number: Fits Cummins QST30, CM552, QST30, CM850, QSKV60, QST30, 1MW

Turbo model: HX82-A4017BC, F32Y3, HE800FG, HX82, HX82-A4017BC, BA25GA3, HE800FG

Fits 2000- Fits Cummins Various Generator, Construction with QST30 1MW Engine

KW:1341/2146 HP

New, replacement

Enhance the performance of your Cummins Engine QSKV60 with the Turbo HX82 Turbocharger. This top-of-the-line turbocharger, with part numbers 4035862, 4089809, 4035863, and 4035864, is designed to deliver unparalleled power and efficiency. Upgrade your engine with this precision-engineered turbocharger for a smoother, more dynamic driving experience.

 

4. Turbocharger for Volvo

Turbocharger 21761005 VOE21761005 For Volvo L60G L70G L90G EC220D EC235D EW160D

Part Number: 21761005, VOE21761005

Applications:

For Volvo Excavators: EC220DL, EC220D, EC235D, ECR235D

For Volvo Wheel Loaders: L60G, L70G, L90G

For Volvo Other Models: P6820C, ABG, P6870/5870/5770C, ABG, SD115

Enhance the performance of your Volvo construction equipment with the Turbocharger 21761005 VOE21761005. Specifically designed for Volvo models L60G, L70G, and L90G, as well as EC220D, EC235D, and EW160D, this turbocharger is a game-changer in boosting engine power and efficiency.